The 009-MXQ-01 is a liquid cooled coldplate specifically designed for cooling three 122x62mm IGBT power modules in a compact and lightweight design. The advanced design of the 009-MXQ-01 allows for efficient heat transfer between the coldplate contact area and the IGBT power module base plate.
The 009-MXQ-01 can dissipate 3000 Watts of heat at a flow rate of 8 LPM. This results in a 24°C temperature rise from the fluid inlet to the maximum coldplate temperature. The internal fin structure also results in a pressure loss of 1.35 PSI at this flow rate. This performance is achieved with an empty weight of the coldplate of less than 1.33 kg.
Part # | Coldplate Dimensions | Material | Inlet/Outlet Ports |
009-MXQ-01 | 198 mm x 147 mm x 20 mm | Aluminum | ¼ – 18 NPT |
The 009-MXQ-01 Liquid Cooled Coldplate is specifically designed to accept mounting of three(3) of these IGBT power module packages;
SEMIKRON SEMiX® 3
INFINEON EconoDUAL™ 3
FUJI SEMICONDUCTOR Spring Contact Module
POWEREX NX™ Series
All mounting holes are predrilled, tapped, and ready to accept the required mounting screws. These coldplates are designed to be “off the self” to help the power electronics engineer to focus on their drive design.
The performance curve shown here is for a cooling fluid of 50% water and 50% ethylene glycol, a very common mixture for the cooling of IGBT power modules when using aluminum coldplates.
Thermal Resistance values use the difference between the Maximum Coldplate Temperature and the Fluid Inlet Temperature.
The pressure drop does include ¼- 18 NPT hose barb fittings.
These aluminum coldplates are compatible with the following cooling fluids;